How to troubleshoot computer network using Ping command

The PING command is the basic network troubleshooting command. Ping shows the status of the other computer whether it is on the network or not. Let’s say you have three computers in your computer network computer A (IP Address, 10.10.10.1), computer B (IP address 10.10.10.2) and computer C (IP address 10.10.10.3). You are on computer A and you want to check the connectivity of the computer B then you will need to go the Start > Run > type CMD > DOS screen will appear. Now type there ping 10.10.10.2 if you get the reply this means the computer B is connected on the network and if you get the timed out message then there is some problem in the connectivity. This can be due to different reasons like check both the ends of the network cables in the computer and in the Router/Switch, check if the green LED light is blinking in the network card of the computer also check if any software application blocking the network communication such as firewall or antivirus etc.